🍹Early to RISA 🧉M to Greentext@sh.itjust.works • 29 days agoAnon isn't fooled by planessh.itjust.worksimagemessage-square100fedilinkarrow-up1529arrow-down120
arrow-up1509arrow-down1imageAnon isn't fooled by planessh.itjust.works🍹Early to RISA 🧉M to Greentext@sh.itjust.works • 29 days agomessage-square100fedilink
minus-square@baguettefish@discuss.tchncs.delinkfedilinkEnglish21•29 days agohot glue or super glue? I mean super glue has super in the name
minus-square@whodatdair@lemmy.blahaj.zonelinkfedilink34•edit-229 days agoWelding is just extreme hot glue, the hottest glue
minus-square@whyNotSquirrel@sh.itjust.workslinkfedilinkEnglish22•29 days agoYou will trigger a lot of people if you say that welding is gluing
minus-square@Comment105@lemm.eelinkfedilink10•edit-229 days agoIt is gluing, but it helps that the glue is hot enough to also melt the glued materials a little bit. Soldering and brazing really are pretty much gluing, though. Fancy hot glue metal with fine tuned properties for penetration and beading.
minus-squaredohpaz42linkfedilinkEnglish3•28 days agoThe glue is the melted metal of the pieces being glued.
minus-square@Comment105@lemm.eelinkfedilink3•28 days agoAlmost never. You can do it but usually you feed in wire or a rod.
minus-squareEnkrodlinkfedilink1•27 days ago it helps that the glue is hot enough to also melt the glued materials a little bit Which is why most glues are really agressive towards the surfaces they adhere. Better bonding if it melts a littke into each other and then hardens together.
minus-square@dave@feddit.uklinkfedilinkEnglish9•29 days agoAny type of glue is fine. Just stay away from the cardboard derivatives.
minus-square@Comment105@lemm.eelinkfedilink7•29 days agoAnd if the wings should fail, unlikely as that may be, do be a dear and try to steer it away from the environment.
hot glue or super glue? I mean super glue has super in the name
Welding is just extreme hot glue, the hottest glue
You will trigger a lot of people if you say that welding is gluing
It is gluing, but it helps that the glue is hot enough to also melt the glued materials a little bit.
Soldering and brazing really are pretty much gluing, though. Fancy hot glue metal with fine tuned properties for penetration and beading.
The glue is the melted metal of the pieces being glued.
Almost never.
You can do it but usually you feed in wire or a rod.
Which is why most glues are really agressive towards the surfaces they adhere. Better bonding if it melts a littke into each other and then hardens together.
Any type of glue is fine. Just stay away from the cardboard derivatives.
And if the wings should fail, unlikely as that may be, do be a dear and try to steer it away from the environment.